PHTA Welcomes Comments on Revised National Standard for Residential Pool/Spa Energy Efficiency

Phta Tile

The Pool & Hot Tub Alliance (PHTA) is inviting public review and comments on the revision of the ANSI/APSP/ICC-15 2011 American National Standard for Residential Swimming Pool and Spa Energy Efficiency, also known as the PHTA-15 standard. Public review is an important part of the American National Standards Institute (ANSI) standards consensus development process.

The PHTA-15 standard covers energy efficiency requirements for permanently installed residential aboveground/onground and inground swimming pools and inground spas operated by the property owner and used for bathing. It is intended to cover certain aspects of the swimming pool filtration and auxiliary system design; equipment, including pool and spa heaters; installation; and operational capabilities, for the purpose of minimizing energy consumption while maintaining water quality and temperature. The standard is intended to meet the new requirements of the Department of Energy’s Dedicated Purpose Pool Pump (DPPP) Rule, which applies to all pumps regardless of their use or purpose.

"Energy efficiency has become very important to the pool industry and to our nation," explains Kenneth Gregory, PHTA-15 Standard Writing Committee (SWC) Chair and Compliance & Safety Manager of Pentair. "In recent years, the pool industry has led the way in saving consumers money by providing energy-saving products as required by the APSP-15 standard. This new revision, PHTA-15, takes energy saving to a new level. Consumers for years to come will enjoy major savings on the cost to operate their pool, spa, or hot tub."

PHTA invites all pool and hot tub professionals, as well as non-industry members, to review the draft and submit comments for consideration. The ANSI public review announcement on the required 45-day public review period was published in the ANSI Standards Action on June 4, 2021. All public review comments on the revised PHTA-15 standard are due on Monday, July 19, 2021.

The PHTA-15 standard is a revision and redesignation of ANSI/APSP/ICC-15 2011 American National Standard for Residential Swimming Pool and Spa Energy Efficiency and is consolidated with Addenda A Approved by ANSI on January 9, 2013. The following individuals served on the PHTA-15 SWC:

Kenneth Gregory, Chair, PENTAIR (Washington, Utah)
Dan Baldewicz, Energy Solutions (Oakland, Calif.)
Philip Escobedo, Fluidra (Carlsbad, Calif.)
John Garner, Sr., Pools by John Garner Inc. (Jacksonville, Fla.)
Paul Hackett, H2flow Controls Inc. (Sylvania, Ohio)
Ray Mirzaei, Waterway Plastics (Oxnard, Calif.)
John O'Hare, Hayward Pool Products (Clemmons, N.C.)
Shawn Strausbaugh, International Code Council (York, Pa.)
Gary Walt, Speck Pumps-Pool Products, Inc. (Jacksonville, Fla.)

To request an electronic copy of the draft standard revision for review and comment, please email [email protected] or call (703) 838-0083.

Page 1 of 177
Next Page
Buyer's Guide
Find manufacturers and suppliers in the most extensive searchable database in the industry.
Learn More
Buyer's Guide
Content Library
Dig through our best stories from the magazine, all sorted by category for easy surfing.
Read More
Content Library